KTECH-Semicondutor, Balancer,Leadfree,Soldertip,PCB endmil and tools...for PCBs

Máy đo điện trở bề mặt TREK 152-1-CE

call
Số lượng
  • Đánh giá sản phẩm
 Thanh toán trực tuyến qua Ngân lượng  Thanh toán trực tuyến qua Bảo kim  Thanh toán trực tuyến qua Paypal
Thông tin tóm tắt sản phẩm

Danh mục đang cập nhật!

Hỗ trợ mua hàng

  • Mr. Hưng 0983.327.989
  • Mr. Hải 0983.680.082
  • Ms.Hằng 0987.850.104
  • Pls contact for detail

Máy đo điện trở bề mặt TREK 152-1-CE

Resistance / Volume Meter

Model 152-1

Model 152-1 resistance / Volume METER

The Trek Model 152-1 Resistance/Volume Meter is designed to precisely measure surface or volume resistance on a wide variety of conductive, dissipative, and insulative materials. The Model 152-1 employs a measurement technique which conforms to several ANSI/ESD Association standards for measuring surface resistance, resistivity, and volume resistance including STM2.1 for garments, STM4.1 for work surfaces, STM 7.1 for flooring, STM11.11 for planar materials, STM11.12 for volume resistance [IEC 61340-2-3] and STM11.13 two point resistance measurement. A variety of measuring probe electrode configurations are available for making surface resistance measurements, volume resistance measurements or used for surface resistivity meter calculations.

The Model 152-1 features exceptional measurement accuracy and wide measurement ranges of 103 to 1013 ohms using point-to-point probes or the two-point resistance probe for small surface measurements. The probes are purchased separately. Measured resistance values are clearly displayed on a high-contrast LCD display using scientific notation.

The electrode test voltage for the measurement probe(s) is switch selectable for 10 V or 100 V operation to conform to the individual requirements of the ANSI/ESD Association standards and testing conditions. The selected test voltage is indicated on the LCD display. The Model 152-1 is light-weight and portable, and can be operated from internal batteries or connected to an AC line power source using a battery eliminator.

152-1 Walking Test Adapter

  • The Walking Test Adapter Kit [CN 1K039 ] for the Models 152 Resistance Meter and
    152-1 Resistance/Volume Meter allows analysis of resistance levels on the human body.

    The resistance of a person to ground in an electronic environment can be measured with the Trek Walking Test Adapter. This test provides measurement data of actual resistance on a person in multiple locations. This test ensures ESD safe practices, such as STM 97.1 "Body System to Ground" resistance measurements, are being implemented properly and that proper resistance is being maintained. Contact Factory for more information.

PERFORMANCE

Measurement Range
10 E3 to 10 E13 ohms.

Measurement Accuracy (of reading)
At 25 °C ±10 °C at 20% to 70% Relative Humidity:
Point-to-Point Probes [ Model 152AP-5P]
10 E3 to 10 E12 ohm range,±5% of LCD reading,
10 E13 ohm range,±8% of LCD reading.
Concentric Ring Probe [Model 152P-CR-1] and
Two-Point Resistance Probe [Model 152P-2P]
10 E3 to 10 E11 ohm range, ±5% of LCD reading,
10 E12 to 10 E13 ohm range,±10% of LCD reading.

Probe Electrode Test Voltage
User selectable for 10 V or 100 V, ±2%.

Test Current Limit
Limited to less than 13 mA in the 10 V range and less than 1.7 mA in the 100 V range.

Test probes / accessories

  • Model 152AP-5P Test Probes
    2.27 kg. (5 lb.) (set of two probes) Available for performing resistance measurements including ANSI/ESD-STM4.1 standards (point-to-point or resistance to ground measurements).

    Model 152P-2P Two Point Resistance Probe
    Performs measurements on surface areas too small to be measured with conventional probes.

    Model 152P-CR-1 Surface/Volume Concentric Ring Probe
    Measures surface and volume resistance of materials as per IEC or ESDA standards. A three (3) position switch on the probe selects either SURFACE resistance or VOLUME resistance measurements with either a GUARDED or UNGUARDED outer electrode. Surface / Volume Resistance Measurements

    Resistance Probes, 3mm x 25.4mm
    Set of two miniature probes [CN 17540] can be handheld and randomly positioned.

    Test Plate Set (consists of two separate plates)
    The use of these plates [CN 17530] are described in the ESD STM11.12 and IEC 61340-2-3 standards.
    Conductive Plate
    (5" x 5"/127 mm x 127 mm) A stainless steel conductive plate (with a mini banana plug
    connector).
    Insulative Plate
    (5.4" x 5.4"/ 137 mm x 137 mm) Acts as an insulative surface.

    Walking Test Adapter Kit
    The Walking Test Adapter allows analysis of resistance levels on the human body [STM 97.1]. Contact factory for more information


Bình luận từ Facebook

Phản hồi

Hỗ trợ trực tuyến

Tổng đài CSKH : 19006121


SẢN PHẨM NỔI BẬT
Video
Clip
Lượt truy cập
  • Hôm nay 628
  • Tổng lượt truy cập 665,675